Subscribe to: Magazine Email Newsletter RSS Feed LinkedIn Twitter Facebook

Firm Control Styling Gel

1. Deionized water
93.21

2. Carbopol Ultrez 21 Polymer
(Acrylates/C10-30 alkyl acrylate crosspolymer)
0.50

3. Fixate G-100 Polymer
(AMP- acrylates/allyl methacrylate copolymer [26%])
2.88

4. Fixate PLUS Polymer
(Polyacrylate-14 [30%])
2.50

5. Propylene glycol
0.20

6. Glycerin
0.20

7. Versene 100XL
(Tetrasodium EDTA, liquid [38%])
0.10

8. Glydant Plus Liquid
(DMDM hydantoin [and] iodopropynyl butylcarbamate)
0.30

9. Triethanolamine
q.s. to pH 6.8-7.2

Procedure:
Weigh deionized water in vessel large enough to provide adequate mixing. Water temperature should be 25-40°C. Sprinkle Carbopol Ultrez 21 into deionized water and allow to wet out. Gently mix for 10-20 minutes. Slowly add Fixate G-100 to vessel. Mix for approx. 5 minutes. Slowly add the Fixate PLUS to vessel. Mix for approx. 5 minutes. Slowly add ingredients 5 through 8 to vessel. Mix well after the addition of each ingredient. Neutralize to pH 6.8-7.2 using TEA. Scrape sides of the vessel to incorporate all ingredients, assuring homogeneity. Mix until uniform before packaging.

More Info:
Noveon, 9911 Brecksville Rd., Cleveland, OH 44141
Tel: (216) 447-5000; (800) 379-5389; Fax: (216) 447-5250; Website: www.noveon.com

Hot Pour Sunrise Eyeshadow/Blush

Phase A

Permethyl 102A (Presperse)
(Isoeicosane)
43.80

Carnauba wax (Hansontech)
(Carnauba)
3.00

Bentone Gel ISD (Rheox)
(Isododecane [and] quaternium-18 hectorite [and] propylene carbonate)
4.00

Phase B

Luxsil (Presperse)
(Calcium aluminum borosilicate)
31.00

Cosmetic russet C33-8075
(Sun Chemicals)
(Red iron oxide C33-8075)
5.90

Cosmetic black C33-7734
(Sun Chemicals) (Black iron oxide C33-7734)
0.10

Propylparaben, USP (ISP)
0.20

Phase C

PresPearl Ultra Bronze (Presperse)
(Mica [and] iron oxide)
10.00

Jeesilc IDD (Jeen International)
(Dimethicone crosspolymer-3 [and] isododecane
2.00

Procedure:
Combine phase A materials. Mix well and start heating to 85˚C. Pre-blend phase B in an Osterizer. Mix well until all color pigments are uniformly dispersed. Add phase B to phase A. Mix well. Add phase C materials in sequence to the batch. Continue mixing. Pour at 85˚- 80˚C in an appropriate molders.

More Info:
Presperse, Inc., 635 Pierce St., Somerset, NJ 08873
Tel:  (732) 356-5200; Fax: (732) 356-3533; Website: www.presperse.com

Forever Aftershave with Sunscreens

Water
55.70

Carbopol Ultrez 21 (Noveon)
(Acrylates/C10-30 alkyl acrylates crosspolymer)
0.20

Drieline 1S (Atrium)
(Sorbitol [and] yeast extract)
2.00

MDI Complex (Atrium)
(Glycosaminoglycans)
5.00

Alpha Bisabolol (Essential Ingredients)
0.50

Wacker-Belsil DMC 6031
(Wacker Silicones)
(PEG/PPG-25/25 dimethicone)
2.00

VitaCon AEM (Essential Ingredients)
(PEG-16 macadamia glycerides [and] octyl dodecanol [and] propylene glycol [and] zea mays [corn] oil [and] tocopheryl acetate [and] cholecalciferol [and] retinyl palmitate [and] ascorbic acid [and] pyridoxine HCl [and] silica [and] sodium propoxy-hydroxy-propyl thiosulfate silica)
0.50

SilSense A-23 (Noveon)
(PEG-7 amodimethicone)
1.00

Merguard 1190 (Nalco)
(Methyldibromo glutaronitrile [and] dipropylene glycol)
0.30

SD alcohol 40B (MGP)
15.00

Floramac 10 (Floratech)
(Ethyl macadamiate)
2.00

Hallbrite OS (RTD Hallstar)
(Octisalate)
5.00

EI OMC (Essential Ingredients)
(Octinoxate)
5.00

Benzophenone-3 (Essential Ingredients)
(Oxybenzone)
3.00

Fragrance 8-78-1 (Medallion)
0.40

TEA 99%
(Triethanolamine)
0.40

Merquat 3330 (Nalco)
(Polyquaternium-39)
2.00

Procedure:
In an appropriate sized vessel, weigh out the water and the Carbopol Ultrez-21. Allow the Carbopol Ultrez-21 to completely hydrate without mixing. Once the hydration is completed, begin mixing the batch. Add the Drieline, MDI Complex, alpha-Bisabolol, Wacker Belsil DMC6031, VitaCon AEM, SilSense A-23 and Merguard 1190 while mixing the batch.  Continue mixing until uniform. In a separate vessel, prepare the sunscreen pre-blend by combining the SD 40B Alcohol, Hallbrite OS, EI OMC, Benzophenone-3, Floramac 10 and Fragrance. Mix this pre-blend until all of the Benzophenone-3 has dissolved and the blend is uniform. Add the sunscreen pre-blend to the batch with mixing. Mix the batch until it is uniform. Add the TEA to the batch with mixing. Once the batch is uniform, add the Merquat 3330 and mix the batch until uniform.

Properties:
pH: 6.80 - 7.20
Viscosity: 1,500 - 2,000cps
    (Brookfield LVT Spindle #3 @ 30rpm)
Stable for 5 freeze/thaw cycles
Stable 1 month at 50°C
Estimated SPF: 15

More Info:
Essential Ingredients, 4544 Atwater Ct., Suite 110, Buford, GA  30518
Tel: (770) 831-9010; Fax: (770) 831-9188;  Website: www.essentialingredients.com

Alcohol-Free Fragrance

Perfume
4.00

Pure water
88.98

Preservative
0.50

FDC blue n°1 (Sensient)
(1% in pure water)
0.20

Covabsorb (Sensient)
0.50

Procedure:
Heat solubilisant LRI at 40°C. Add Covabsorb and perfume, then mix well. Progressively add the water containing preservative and dyes.

More Info:
Sensient Cosmetic Technologies-LCW
7-9, Rue d L'Industrie, 95310 Saint Ouen L'Aumône, France
Tel: 33(01) 1 34 48 57 00; Fax: 33 (01) 1 34 64 44 40

Gel with Cell Fat Regulator Activity

Phase A

Water
86.90

Preservative
q.s.

Glycerin
5.00

Carbolpol ETD 2020
(Acrylates/C10-30 alkyl acrylate crosspolymer)
0.50

Phase B

NaOH 10%
(Sodium hydroxide)
q.s.

Phase C

Setakol (Centerchem, Pentapharm)
(Hydrolyzed sericin)
1.00

Regu-Shape (Centerchem, Pentapharm)
(Conjugated linoleic acid, aqua, soya lecithin, propylen glycol, polysorbate 80, paraben)
3.00

D, L-alpha-Tocopherol
0.20

Phase D

Keltrol RD
(Xanthan gum)
0.40

Phase E

Dry Flo AF
(Corn starch modified)
2.00

Abil B 88183
(PEG/PPG-20/6 dimethicone)
1.00

Procedure:
Disperse Carbolpol ETD 2020 in phase A.  Adjust the pH at approx. 5.5-6.0 with phase B.  Add ingredients of phase C one after the other while stirring. Add phase D while stirring.  Finally, add ingredients of phase E one after the other while stirring and mix to obtain a homogeneous gel.

More Info:
Centerchem, Inc., 20 Glover Ave., Norwalk, CT 06850
Tel:  (203) 822-9800; Fax: (203) 822-9820
E-mail: cosmetics@centerchem.com; Website: www.centerchem.com

Revitalizing Conditioner

Phase A

Demineralized water
85.80

Versene Na2 (Dow)
(EDTA dissodium)
0.10

STILB Touch HDE (Beraca)
(Water [and] limoleamidopropyl PG-Dimonium chloride phosphate dimethicone [and] polyquaternium-10 [and] quillaja saponaria molina)
3.50

Cetrimonium chloride (Clariant)
1.00

Germall 115 (ISP)
(Imidazolidinyl urea)
0.20

Nipagin
(Methylparaben)
0.10

Phase B

Brij 72 (Uniqema/Beraca)
(Steareth-2)
0.20

Stearalkonium chloride (Clariant)
2.00

Cetearyl alcohol (M. Cassab)
3.50

Ceraphyl 70 (ISP)
(polyquaternium-70)
0.70

Rain Forest RF 3410 (Beraca)
(Theobroma grandiflorum seed butter)
0.20

Beracare ARS Hair System (Beraca)
(Passiflora edulis seed oil [and] oriza sativa rice bran oil [and] euterpe oleracea pulp oil)
2.00

Phase C

Fragrance
0.70

Procedure:
Weigh phase A, heat at 75-80ºC. Weigh phase B, heat at 75-80ºC. Add phase A to phase B and homogenize. Add phase C and homogenize.

More Info:
Beraca Ingredients, Av Juscelino Kubitscheck de Oliveira, 878, cep 13457-190, Santa Bárbara D´Oeste, SP, Brazil; Tel:  (55) 19 3455-1026; Fax: (55) 19 3455-7276
E-mail: beraca@gruposabara.com.br; Website: www.beraca.com.br

Skin Firming Body Treatment

Phase A

Deionized water
73.90

Carbomer (Noveon)
0.60

Phase B

Crodafos CS-20 acid
(Cetearyl alcohol [and] dicetyl phosphate [and] Ceteth-20 Phosphate)
3.00

Crodacol 1618 (Cetearyl alcohol)
1.00

Crodamol STS
(PPG-3 benzyl ether myristate)
2.00

Shea Butter (Butyrospermum Parkii)
0.30

Crodarom avocadin
(Persea gratiussima [avocado] oil unsaponifiables)
0.30

Crodaderm S (Sucrose polysoyate)
0.30

Dimethicone (Dow Corning)
1.00

Methyl paraben
0.20

Propyl paraben
0.20

Phase C

Sodium Hydroxide Solution (20% aq.)
1.20

Phase D

Phytessence wakame
(Glycerin [and] water [and] undaria [and] pinnatifida extract)
5.00

Phytessence stevia
(Glycerin [and] water [and] stevia rebaudiana extract)
5.00

Phytotal FM
(Glycerin [and] butylene glycol [and] juglans regia [walnut] leaf extract [and] juglans regia [walnut] shell extract [and] centella asiatica extract [and] pyrus germanica extract [and] lecithin)
3.00

Phytotal SL
(Glycerin [and] verbena officianalis extract [and] butylene glycol [and] sambucus nigra flower extract [and] eugena caryophyllus [Clove] flower extract [and] lecithin)
3.00

Procedure:
Place water into main vessel and begin heating to 80°C. Dust in carbomer mix until hydrated. Pre-mix phase B and heat to 80°C. Add phase B to phase A, then add phase C. Allow emulsion to cool to room temperature. Add phase D, individually with mixing. Adjust pH to 6.0, if necessary.

Properties:
pH: 6.08 ± 0.5
Viscosity: 16,700 cps ± 10%
(RVT Spindle # TC@ 10 rpm, 25°C).

More Info:
Croda Inc., 300-A Columbus Circle, Edison, NJ, 08837
Tel: (732) 417-0800; Fax: (732) 417-0804; Website: www.crodausa.com

Light Nutrigel

Phase A

Cosmedia SP
(Sodium polyacrylate)
1.0

Cutina PES
(Pentaerythrityl distearate)
1.0

Cetiol CC
(Dicaprylyl carbonate)
5.0

Cetiol LC
(Coco-caprylate/caprate)
5.0

Phase B

Water, deionized
88.0

Phase C

Perfume
q.s.

Preservative
q.s.

Procedure:
Heat phase A to 80-85°C and stir homogeneously. Heat phase B to 80-85°C and add to the oil phase while stirring. Allow the emulsion to cool while stirring in such a way that it remains in continual motion. Avoid incorporation of air. Add the components of phase C at 40°C. Add the components of phase C if available at 40°C. If necessary adjust the pH value. Stir while cooling to 30°C.

Properties:
Viscosity (mPas), Brook.RVF, 23°C, sp.TE,
4 rpm, with Helipath: 162.500
pH: 6.1

More Info:
Cognis Corp., 300 Brookside Ave., Ambler, PA 19002
Tel: (800) 531-0815; Fax: (215) 628-1450; Website: www.cognis.com

Search the Buyer's Guide for a company:

Search the Buyer's Guide for a category:

Search the Buyer's Guide for a term:

This will search both companies and categories


Please visit our Sister Sites:

    

Copyright © 2014 Rodman Media / HAPPI. All Rights Reserved. All rights reserved. Use of this constitutes acceptance of our Privacy Policy
The material on this site may not be reproduced, distributed, transmitted, or otherwise used, except with the prior written permission of Rodman Media / HAPPI.